Sheet
Spec
MICROGLASS SPECIFICATIONS
Product Number Screen Size (inches) Average Fiber Diameter (microns) Average Fiber Length (microns) Loose Bulk Density (g/cc) Appearance 3082 1/32 16 120 1.05 Powdery 3080 1/32 1 6 150 0.93 Powdery 3032 1/32 16 200 0.78 Powdery 3016 1/16 16 260 0.53 Floccular 3004 1/4 16 290 0.38 Floccular 7280 1/32 16 120 0.93 Powdery 7232 1/32 16 230 0.78 Powdery 7216 1/16 16 270 0.53 Floccular 7204 1/4 16 300 0.38 Floccular 9110 1/32 16 150 0.93 Powdery 9132 1/32 16 220 0.78 Powdery 9007D 1/16 16 260 0.53 Floccular 9114 1/4 16 280 0.38 Floccular 6608 1/8 16 470 0.28 Floccular 661 6 1/16 16 290 0.43 Floccular
SILANE
SILANE
CATIONIC
UNSIZED
DESCRIPTION Microglass milled fibers are E -glass filaments hammer milled to various bulk densities. PRIMARY USE Microglass is used as a filler/reinforcement in composites to increase mechanical properties (tensile, fl exural and impact), improve dimensional stability and minimize distortion at elevated temperatures.
Our glass fiber reinforcements are 10 or 16 microns in diameter and milled to lengths ranging from 120 to 470 microns. They are used in composites to increase mechanical properties such as tensile, flexural and impact strength. They are also used to increase dimensional stability and minimize distortion at elevated temperatures. Milled glass fibers are compatible with all thermoset and thermoplastics resins. Surface treatments are available that may enhance performance.
MICROGLASS PRODUCT DATA OVERVIEW SHEET
GENERAL SPECIFICATIONS Fiber Diameter Loose Bulk Density Sizing These characteristics are unique for each product Appearance See milled fiber specifications below. Solid Loss on Ignition Moisture Content Maximum 0.1% Contamination Free of foreign matter, dirt, oil or grease, and hard lumps of nodulated fibers and/or unmilled fibers. Color Off - white to white. }
            Call Us: 508 697 5100
Microglass
Quality Service Price PRODUCT SURFACE MODIFICATIONS AND END USE
3000 Series - Unsized fibers compatible with all thermoset and thermoplastic resins. 6000 Series - Low cost fibers with higher levels of surface treatment compatible with all thermoset and thermoplastic resins. 7000 Series - Cationic surface treatment to accelerate wet out, improve dispersion, and overall processability. Compatible with all thermoset and thermoplastic resins. 9000 Series - Silane surface treated fibers for improved bonding between the inorganic glass and the organic resin. Sizings are available for various resins such as polyesters, epoxies, phenolics, polyurethanes, polyvinyl chloride and other resin systems.
Home Products & Spec Sheets Application Bulletins Quality & Services Inquiry Form SDS About Us Contact Microglass Mica Wollastonite Microwool Functional Filler Solutions
Technical / Sales Support: contact Bill Simons for application bulletins, samples, or technical assistance.
ISO 9001:2015 Certified
Final determination of the suitability of the material for the use contemplated is the sole responsibility of the user. No warranty is expressed or implied, and the manufacturer�s only obligation shall be to rep lace such quantity of the product proven to be defective.
   Since 1986
To Top To Top
© Copyright 2019 Fibertec, Inc. All Rights Reserved
35 Scotland Boulevard Bridgewater, MA 02324  Phone 508.697.5100 Fax 506.697.7140
MICROGLASS PRODUCT DATA OVERVIEW  SHEET
MICROGLASS SPECIFICATIONS
Sheet Spec Product Number Screen Size (inches) Average Fiber Diameter (microns) Average Fiber Length (microns) Loose Bulk Density (g/cc) Appearance
Microglass milled fibers are E -glass filaments hammer  milled to various bulk densities.
Microglass is used as a filler/reinforcement in  composites to increase mechanical properties (tensile, fl exural and impact), improve dimensional stability and  minimize distortion at elevated temperatures.
PRODUCT SURFACE MODIFICATIONS  AND END USE
3000 Series - Unsized fibers compatible with all thermoset and thermoplastic resins. 6000 Series - Low cost fibers with higher levels of surface treatment compatible with all thermoset and thermoplastic resins. 7000 Series - Cationic surface treatment to accelerate wet out, improve dispersion, and overall processability. Compatible with all thermoset and thermoplastic resins. 9000 Series - Silane surface treated fibers for improved bonding between the inorganic glass and the organic resin. Sizings are available for various resins such as polyesters, epoxies, phenolics, polyurethanes, polyvinyl chloride and other resin systems.
Our glass fiber reinforcements are 10 or 16 microns in diameter and milled to lengths ranging from 120 to 470 microns. They are used in composites to increase mechanical properties such as tensile, flexural and impact strength. They are also used to increase dimensional stability and minimize distortion at elevated temperatures. Milled glass fibers are compatible with all thermoset and thermoplastics resins. Surface treatments are available that may enhance performance.
DESCRIPTION PRIMARY USE
Call Us:  (508) 697-5100
Microglass
Quality Service Price GENERAL SPECIFICATIONS Fiber Diameter Loose Bulk Density Sizing These characteristics are unique for each product Appearance See milled fiber specifications below. Solid Loss on Ignition Moisture Content Maximum 0.1% Contamination Free of foreign matter, dirt, oil or grease, and hard lumps of nodulated fibers and/or unmilled fibers. Color Off - white to white. } Site Navigation
ISO 9001:2015 Certified
Technical / Sales Support: contact Bill Simons for application bulletins, samples, or technical assistance.
Final determination of the suitability of the material for the use contemplated is the sole responsibility of the user. No warranty is expressed or implied, and the manufacturer�s only obligation shall be to rep lace such quantity of the product proven to be defective.
   Since 1986
3082 1/32 16 120 1.05 Powdery 3080 1/32 1 6 150 0.93 Powdery 3032 1/32 16 200 0.78 Powdery 3016 1/16 16 260 0.53 Floccular 3004 1/4 16 290 0.38 Floccular 7280 1/32 16 120 0.93 Powdery 7232 1/32 16 230 0.78 Powdery 7216 1/16 16 270 0.53 Floccular 7204 1/4 16 300 0.38 Floccular 9110 1/32 16 150 0.93 Powdery 9132 1/32 16 220 0.78 Powdery 9007D 1/16 16 260 0.53 Floccular 9114 1/4 16 280 0.38 Floccular 6608 1/8 16 470 0.28 Floccular 661 6 1/16 16 290 0.43 Floccular
SILANE
SILANE
CATIONIC
UNSIZED
Mica Microglass Microwool Wollastonite
© Copyright 2019 Fibertec, Inc. All Rights Reserved
35 Scotland Boulevard Bridgewater, MA 02324  Phone 508.697.5100 Fax 506.697.7140
Functional Filler Solutions